EasyManuals Logo

Xerox DocuMate 4830 User Manual

Xerox DocuMate 4830
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Xerox DocuMate 4830
User’s Guide
105
6. Select the scan configuration you want to use for scanning in the Select configuration list.
Click on the Edit button to open the Scan Configuration Properties window to configure any destination
specific scanning options.
Each destination that has per-scan configuration properties will be represented by its configuration tab in the
One Touch Scan Configuration Properties window. Please refer to the destination instructions, as described in
the previous section(s), for configuring destination specific options.
Click on OK when you are done making changes in this window.
7. Click on OK on the One Touch Properties window.
8. Load the document(s) in the scanner and start scanning with the button you set to scan to multiple
destinations.
The scanner starts scanning and when finished, the image is sent to each destination you selected in the One Touch
Properties window.
Technical Note
The Still Image Client destination cannot be used with multiple destination scanning. This destination will be
disabled when the Enable scanning to multiple destinations is selected.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox DocuMate 4830 and is the answer not in the manual?

Xerox DocuMate 4830 Specifications

General IconGeneral
Film scanning-
Color scanningYes
Maximum scan size297 x 2997 mm
Output color depth24 bit
ADF scan speed (b/w, A4)50 ppm
ADF scan speed (color, A4)30 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (b/w, A4)100 ipm
Duplex ADF scan speed (color, A4)60 ipm
Scanner typeFlatbed & ADF scanner
Product colorBlue, Grey
Built-in displayNo
Sensor typeCIS
Scan driversISIS, TWAIN, WIA
Daily duty cycle (max)3000 pages
Auto document feeder (ADF) input capacity75 sheets
Maximum ISO A-series paper sizeA3
Auto Document Feeder (ADF) media weight75 - 80 g/m²
USB version2.0
Standard interfacesUSB 2.0
Input voltage100-240 V
Power supply typeAC
Power consumption (standby)15 W
Power consumption (typical)30 W
Minimum RAM2048 MB
Minimum storage drive space350 MB
Cables includedAC, USB
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth499 mm
Width581 mm
Height194 mm
Weight12000 g

Related product manuals