EasyManuals Logo
Home>Xerox>Scanner>DocuMate 6480

Xerox DocuMate 6480 User Manual

Xerox DocuMate 6480
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Maintenance Xerox
®
DocuMate
®
6460 / 6480
User Guide 39
5. Carefully angle the roller up and out of the scanner and then discard it, it cannot be repaired.
6. Take the new roller out of its packaging. Clean any dust off the roller before installing it.
7. Insert the left end of the new roller assembly into the hole in the roller channel. Angle the
roller module into the roller channel. Align the tab on the lock flange with the slot in the
scanner.
Make sure the belt on the roller is facing you and that the gears on the roller module properly
align to the gears in the scanner. Hold the roller module in the scanner while you lock it in
place.
8. Rotate the locking tab into the slot in the scanner. Push on the lever until it clicks in place and
locks the roller in the scanner.
The lock will “click” into place when it is secure. However, if it does not rotate easily into the
housing, make sure the flange is properly seated in its latch.
9. Lift the roller cover and carefully push it closed to lock it in place. Make sure everything is
aligned properly and the cover is fully closed. If the cover is not fully closed it will break during
scanning and damage the scanner.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox DocuMate 6480 and is the answer not in the manual?

Xerox DocuMate 6480 Specifications

General IconGeneral
Media thickness (min)1.25 mm
Maximum scan area (ADF)216 x 5994 mm
Minimum scan area (ADF)51 x 51 mm
Scanning media types supportedPhoto paper, Plastic Card
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight75 - 90 g/m²
Scanner typeADF scanner
Product colorBlue, White
Built-in displayYes
Auto document feeder (ADF) input capacity120 sheets
Film scanningNo
Maximum scan size241 x 5994 mm
Output color depth24 bit
Output grayscale depth8 bit
Output monochrome depth1 bit
ADF scan speed (b/w, A4)80 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (b/w, A4)160 ipm
Sensor typeCCD
Scan driversISIS, TWAIN, WIA
Daily duty cycle (max)10000 pages
USB version3.2 Gen 1 (3.1 Gen 1)
Standard interfacesUSB 3.2 Gen 1 (3.1 Gen 1)
Cables includedAC, USB
Minimum RAM2048 MB
Minimum processorIntel Pentium IV
Minimum storage drive space350 MB
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
Sustainability certificatesENERGY STAR
Power supply typeAC
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth168 mm
Width316 mm
Height191 mm
Weight4700 g

Related product manuals