Xerox Phaser 3020

June 2014
2-6
Xerox® Phaser® 3020 Printer Service Manual
09-100 , 09-350
Status Indicator RAPs
09-100 Print Cartridge Near End of Life Fault
The Print Cartridge life is less than 10%.
BSD-Reference: None
Procedure
1. Check the remaining life of the Print Cartridge by using one of the methods listed below:
• Print a Supplies Information Report. Refer to the Phaser 3020 User Guide, Section
1, Control Panel and Information Pages, for detailed information on using the Control
Panel buttons to obtain reports. GP 2
• Open Easy Printer Manager, check Toner Life. **VERIFY ‘PRINT’ OR ‘TONER’?
• Open the CWIS application. Select; [Status, Supplies, Print Cartridge].
2. Check the remaining life of the Print Cartridge.
3. If the Print Cartridge has reached end of life, switch Off the power and replace the Print
Cartridge.
09-350 Print Cartridge End of Life Fault
The Print Cartridge has reached end of life.
BSD-Reference: None
Procedure
1. Check the remaining life of the Print Cartridge by using one of the methods listed below:
• Print a Supplies Information Report. Refer to the Phaser 3020 User Guide, Section
1, Control Panel and Information Pages, for detailed information on using the Control
Panel buttons to obtain reports. GP 2
• Open Easy Printer Manager, check Toner Life.
• Open the CWIS application. Select; [Status, Supplies, Print Cartridge].
2. Check the remaining life of the Print Cartridge.
3. If the Print Cartridge has reached end of life, switch Off the power and replace the Toner
Cartridge.