General Care
Xerox
® Phaser® 3052/3260
User Guide
121
4. Slowly shake the new cartridge five or six times to
distribute the toner evenly inside the cartridge.
Note: If toner gets on your clothing, wipe it off with a
dry cloth and wash clothing in cold water. Hot water
sets toner into fabric.
5. Hold the toner cartridge by the handle and slowly
insert the cartridge into the opening in the machine.
Tabs on the sides of the cartridge and corresponding
grooves within the machine will guide the cartridge
into the correct position until it locks into place.
6. Close the front cover. The Machine Status light will
return to green, indicating the printer is ready. The
Toner LED light should not be lit, indicating there is
enough toner to print.
Replacing the Drum Cartridge
When it is time for a new drum cartridge, the Machine Status light on the control panel blinks red. To
replace the Drum Cartridge, follow the instructions provided below or with the consumable.
1. Open the front cover.
2. Pull the toner cartridge out and place it on a clean flat
surface.
To Next Page
Loading...
Need help?
General