Network Installation: Linux
Xerox® Phaser® 3052/3260
User Guide
31
7. Select Exit to close the program.
8. To allow access to the printer, edit the /etc/hosts table to list the client system.
9. Edit and create the /etc/hosts.lpd file to list the client system.
Dynamic Addressing
Procedure
Follow the steps in Configure TCP/IP Settings Using CentreWare CentreWare Internet Services, then
return to this page.
Important: Highlight BOOTP in step 6.
Follow the steps to Create the Print Queue.
To Next Page
Loading...
Need help?
General