Windows Drivers
Xerox® Phaser® 3052/3260
User Guide
37
Wireless Setting Program
When installing the Phaser 3052NI, 3260DI, and 3260DNI you can use the Xerox Easy Wireless Setup
program that was automatically installed with the printer driver to configure the wireless settings.
To Open the Program
1. Select Start > Programs or All Programs > Xerox Printers > [Xerox Phaser 3052 or 3260]> Xerox
Easy Wireless Setup.
2. Connect the machine to your computer using the USB cable.
Note: During installation, the printer needs to be temporarily connected using the USB cable.
Note: You cannot use your printer on a wired and wireless network at the same time. If your
printer is currently connected to the network with an Ethernet cable, unplug the cable.
3. Select Next.
4. Once the machine is connected to the computer with the USB cable, the program searches for
WLAN data.
5. When the search is complete, the Select Wireless Network window displays. Select your network
from the list.
6. Click Advanced Setting if you want to enter the following information:
7. Click Next. The Wireless Network Security screen displays.
8. Enter your Network Password and click Next.
9. Click Finish when the setup is complete.
To Next Page
Loading...
Need help?
General