Loading Paper
Xerox® Phaser® 3052/3260
User Guide
57
3. Load the envelope short edge feed and with the flap
facing down as shown in the illustration.
4. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
5. After loading paper in the manual feed slot, ensure you
select the Paper tab in the print driver to specify the
correct paper size and type. For the source, you must
select Manual Feeder. Not confirming the paper details
may result in printing delays.
6. After printing, close the manual feed slot.
To Next Page
Loading...
Need help?
General