Xerox Phaser 3330 System Administrator Guide

Printing
70 Xerox
®
Phaser
®
3330 Printer
System Administrator Guide
Setting the Delete Held Job After Timer
When the Delete Held Job After timer expires, jobs held in the Active Jobs and Personal & Secure Job
tabs are deleted.
1. At the printer control panel, press the Menu button.
2. Navigate to Tools, then press OK.
Note: To access this feature at the control panel, log in as an administrator.
3. Navigate to Setup, then press OK.
4. Navigate to Machine Settings, then press OK.
5. Navigate to User Interface, then press OK.
6. Navigate to Held Job Timeout, then press OK.
7. Navigate to Enable, then press OK.
8. To select the desired time, press the arrow buttons, or enter a value using the numeric keypad.
9. Touch OK.

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg