Xerox Phaser 3330 System Administrator Guide

Administrator Tools
Xerox
®
Phaser
®
3330 Printer 85
System Administrator Guide
Cloning
Cloning allows you to save your current printer settings to a file to use as a backup and restore file for
your printer. You can also use a clone file to copy your printer settings to other printers.
Note: If you are using a clone file to copy your printer settings to another printer, ensure that both
printers are the same model and have the same version of software installed.
To determine the software version:
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > General Setup > Configuration.
2. To verify the software installed on your printer, scroll down to Printer Setup.
Creating a Clone File
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > General Setup > Cloning.
2. Select the features to clone to other printers. All features are selected by default.
3. To view the specific attributes that can be cloned for individual features, click View Feature Details.
4. Click Clone.
5. To download the clone file, for Cloning Instructions, click the Cloning.dlm file.
Installing a Clone File
1. In Xerox
®
CentreWare
®
Internet Services, click Properties > General Setup > Cloning.
2. Click Browse, navigate to the location of the clone file, then click Open.
3. Click Install.
4. Click OK.
Note: When the process is complete, the printer restarts automatically.

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg