Xerox Phaser 3330 User Manual

Environmental Specifications
Temperature
• Operating Temperature: 0–50°C (32–122°F)
• Storage Temperature: -25–85°C (-13–185°F)
Relative Humidity
Minimum–Maximum Humidity Range: 10–90%, less than 90% when in the packaging
• Optimum Humidity: 30–70%
• Operating Humidity: 20–80% Relative Humidity
Note
Under extreme environmental conditions, defects can occur due to condensation.
Elevation
For optimum performance, use the printer at elevations below 2500 m (8,202 ft.).
Electrical Specifications
Power Supply Voltage and Frequency
Power Supply FrequencyPower Supply Voltage
50 Hz
60 Hz
110–127 VAC +/-10%, (99–135 VAC)
50 Hz
60 Hz
220–240 VAC +/-10%, (198–264 VAC)
Power Consumption
• Energy Saver Mode (Sleep): Maximum 3.5 W
• Continuous printing: Maximum 700 W
• Ready/Standby: Maximum 50 W
This printer does not consume electric power when the power switch is turned off even
if the printer is connected to an AC outlet.
A-3Xerox
®
Phaser
®
3330 Printer
User Guide
Specifications

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg