Xerox Phaser 3330 User Manual

Loading Paper
Loading Paper in the Bypass Tray
To load paper in the bypass tray:
1. Open the bypass tray.
If the bypass tray is loaded with paper already, remove any paper that is a different
size or type.
2. Move the width guides to the edges of the tray.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a
level surface. This procedure separates any sheets that are stuck together and reduces
the possibility of jams.
Note
To avoid jams and misfeeds, do not remove paper from its packaging until you are
ready to use it.
Xerox
®
Phaser
®
3330 Printer4-6
User Guide
Paper and Media

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg