Xerox Phaser 3330 User Manual

5. Press the Right arrow button.
6. Press the OK button to accept current setup, or press the Down arrow button to
change the setup.
7. Press the Right arrow button.
8. With Paper Size selected, press the Right arrow button.
9. Press the Up/Down arrow buttons, select the paper size.
10. Press the OK button to save changes.
If you want to use special sized paper, select a custom paper size in the Printer Driver.
Setting the Paper Type
1. Press Menu on the control panel.
2. Press the Up/Down arrow buttons, and select Tray Paper Settings.
3. Press the Right arrow button.
4. Press the Up/Down arrow buttons, and select the required tray.
5. Press the Right arrow button.
6. Press the OK button to accept current setup, or press the Down arrow button to
change the setup.
7. Press the Right arrow button.
8. Press the Up/Down arrow buttons, and select Paper Type.
9. Press the Right arrow button.
10. Press the Up/Down arrow buttons, and select the paper type.
11. Press the OK button to save changes.
4-11Xerox
®
Phaser
®
3330 Printer
User Guide
Paper and Media

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg