Xerox Phaser 3330

Printing on Special Paper
To order paper, transparencies, or other media, contact your local reseller or go to
www.xerox.com/office/3330supplies.
Envelopes
Note
You can ONLY print envelopes from the bypass tray. For details, see Supported Standard
Paper Sizes.
Guidelines for Printing Envelopes
• Print quality depends on the quality and construction of the envelopes. Try another
envelope brand if you do not get desired results.
• Maintain constant temperatures and relative humidity.
• Store unused envelopes in their packaging to avoid excess moisture and dryness
which can affect print quality and cause wrinkling. Excessive moisture can cause the
envelopes to seal before or during printing.
• Before loading envelopes into the tray, remove air bubbles by setting a heavy book
on top of them.
• In the print driver software, select Envelope as the paper type.
• Do not use padded envelopes. Use envelopes that lie flat on a surface.
• Do not use envelopes with heat-activated glue.
• Do not use envelopes with press-and-seal flaps.
• Use only paper envelopes.
• Do not use envelopes with windows or metal clasps.
Loading Envelopes in the Bypass Tray
1. Open the bypass tray.
2. Move the width guides to the edges of the tray.
Xerox
®
Phaser
®
3330 Printer4-12
User Guide
Paper and Media