Xerox Phaser 3330 User Manual

SolutionsProbable Causes
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer.
For details, see Turning On/Off the Printer. If the error persists,
contact your Xerox representative.
The powercord is not correctly
plugged into the outlet.
• A previous print job could be the problem. On your computer,
you can use the printer properties to delete all print jobs in
the print queue.
• Load the paper in the tray.
• At the printer control panel, press the Job Status button. If
the print job does not appear check the Ethernet connection
between the printer and the computer.
• At the printer control panel, press the Job Status button. If
the print job does not appear, check the USB connection
between the printer and the computer. Turn off the printer,
then turn it on again.
The printer is busy.
• At the printer control panel, press the Job Status button. If
the print job does not appear check the Ethernet connection
between the printer and the computer.
• At the printer control panel, press the Job Status button. If
the print job does not appear, check the USB connection
between the printer and the computer. Turn off the printer,
then turn it on again.
The printer cable is disconnec-
ted.
Printer Makes Unusual Noises
SolutionsProbable Causes
Turn off the printer and then remove the ob-
struction or debris. If you cannot remove it,
contact your Xerox representative.
There is an obstruction or debris inside the
printer.
Xerox
®
Phaser
®
3330 Printer7-4
User Guide
Troubleshooting

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English