EasyManuals Logo
Home>Xerox>Printer>Phaser 5550

Xerox Phaser 5550 User Manual

Xerox Phaser 5550
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
Printer Settings
Phaser® 5550 Printer
5-6
Selecting Tray Settings
Tray Switching
When a tray runs out of paper, tray switching enables the printer to switch between trays when
the trays contain the same paper type and size. Tray switching is controlled by the printer
driver, control panel, or CentreWare IS.
If a specific tray is selected in the driver or application, tray switching is turned off. When you
select the Let printer select which tray to print from option in the printer driver, the printer
selects the tray and switches to another tray when one tray is empty.
Note: If you use the printer driver to specify a tray to use for your print job, tray switching is
disabled for that job. If the tray becomes empty during printing, the control panel prompts you
to load paper in that tray even if another tray contains the correct paper type and size for the
job.
Tray 1 (MPT), Tray 2, and Tray 3 are standard features of the Phaser 5550 printer. Additional
paper feeders can be purchased:
1000-Sheet Feeder (Trays 4 and 5)
2000-Sheet Feeder (Tray 6)
Tray Switching Settings
If tray switching is enabled, and a tray runs out of paper while printing, then the printer
selects another tray containing the same paper type, size, and feed direction to continue
printing the job.
If tray switching is disabled, and a tray runs out of paper while printing, then the control
panel prompts you that the tray is empty and must be refilled.
Tray Sequence
You can specify the sequence the printer uses to select trays containing the correct paper type
and size for a print job. When a tray runs out of the correct paper during printing, the printer
selects the next tray in the sequence containing the correct paper type and size to continue
printing the job.
For example, if the tray sequence is set to 6-2-4, the printer selects paper from Tray 6 to print a
job. If Tray 6 does not contain the requested paper, or runs out of paper while printing, the
printer selects Tray 2. If neither Tray 6 or Tray 2 contain the requested paper, or is out of paper,
then Tray 4 is selected.
You can specify the tray sequence by two different methods:
The printer’s control panel
CentreWare IS

Table of Contents

Other manuals for Xerox Phaser 5550

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 5550 and is the answer not in the manual?

Xerox Phaser 5550 Specifications

General IconGeneral
ColorNo
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Warm-up time (from sleep mode)37 s
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)50 ppm
Storage mediaHDD
Internal memory256 MB
Maximum internal memory1024 MB
Internal storage capacity40 GB
Sound power level (standby)5 dB
Sound pressure level (printing)7.19 dB
Total input capacity1100 sheets
Maximum input capacity4100 sheets
FunctionsPrint
I/O portsParallel (IEEE 1284), USB 2.0
Device managerDHCP, PrintingScout Alert Notification, Xerox CentreWare Internet Services Embedded Web Server, Xerox CentreWare Printer Management for Microsoft, Novell, and UNIX
Package length833.11 mm
Power requirements240 V, 50/60 Hz
Networking features10/100BaseTX Ethernet
Wireless technologyIEEE802.11a/b/g
Storage temperature (T-T)41 - 90 °F
Power consumption (active)900 W
Compatible operating systemsHP-UX 10.2, Linux, Mac OS X 10.2, Novell NetWare 4.x, Red Hat 9, SCO, SUSE 9, Solaris 2.5.1/2.6+, Windows 2000/Vista, Xerox Walk-Up PD
Duty cycle letter size (maximum)300000 pages per month
Acoustic power emissions (standby)50 dB
Standard output capacity for envelopes500 sheets
Non-operating relative humidity (non-condensing)15 - 85 %
Acoustic power emissions (active, print, copy or scan)71.9 dB
PCL fonts83
CertificationCE, UL 60950-1/CSA 60950-1-03, FCC Part 15 Class A, 73/23/EEC, RoHS 2002/95/EC
Country of originChina
Maximum duty cycle50000 pages per month
Number of PostScript fonts139
Sustainability certificatesENERGY STAR
Power consumption (standby)11 W
Power consumption (PowerSave)105 W
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Export Control Classification Number (ECCN)EAR99
Weight and Dimensions IconWeight and Dimensions
Height749.29 mm
Package weight65772 g
Dimensions (WxDxH)1380 x 650 x 1050 mm

Related product manuals