Clearing Paper Jams
Phaser® 5550 Printer
6-28
3. If the paper size shown on the control panel does not match the size of the paper in the
tray, do the following:
a. Select
Change Paper Size, and then press the OK button.
b. Select
Auto Sensed, Custom, or a listed paper size, and then press the OK button.
c. If you selected
Custom, specify the width and height of the paper. Select Custom
Width
, press the OK button, scroll to the width of the paper, and then press the
OK button. Select
Custom Height, press the OK button, scroll to the height of the
paper, and then press the OK button.
4. Open Door A.
Warning: Use caution; some components inside Door A may by hot.
5550-001
D
A
E
To Next Page
Loading...
