Xerox Phaser 6360 - Page 125

Index
Phaser® 6360 Color Laser Printer
Index-4
Menu Map, 1-7
messages
control panel, 6-13
PrintingScout, 6-13
modes
print-quality, 4-3
modifying the IP address using
CentreWare IS, 2-8
monitor
colors do not match printed color, 4-14
moving and repacking the printer, 5-8
moving the printer
precautions, 5-8
preparing for shipment, 5-8
within the office, 5-8
N
network
address
configuring, 2-5
choosing a network connection, 2-3
configuring the network address, 2-5
creating a Local Area Network
(LAN), 2-5
mask, 2-6
setup and configuration, 2-2
TCP/IP and IP addresses, 2-5
network connection, 2-3
Ethernet, 2-3
O
Office Color, 4-4
Online Support Assistant, 6-14
operating systems
printer drivers, 2-9
operational guidelines, A-3
operational safety, A-3
options
additional trays, 1-5
hard drive, 1-5
memory, 1-5
printer, 1-5
printing, 3-19
ordering supplies, 5-5, 5-6
P
paper
custom sizes, 3-44, 3-47
damaging to the printer, 3-5
envelopes, 3-31
feeding manually in Tray 1 (MPT), 3-13
glossy, 3-39
labels, 3-34
loading in the paper trays, 3-9
printing on specialty media, 3-25
storage guidelines, 3-5
supported, 3-3
supported for Tray 1 (MPT), 3-7
supported for Trays 2-5, 3-8
supported sizes and weights, 3-6
transparencies, 3-25
types, 3-3
unacceptable media types, 3-5
usage guidelines, 3-4
paper jams, 6-2
duplex unit, 6-9
fuser, 6-7
misfeed at Tray 1 (MPT), 6-2
misfeed at Tray 2, 6-5
preventing, 6-2
registration roller, 6-10
parts of the printer, 1-2
PCL, 2-9
fonts, 1-4
PhaserSMART, 1-9
technical support, 1-9, 6-14
PostScript, 2-9
fonts, 1-4
preparing the printer for shipment, 5-8
pre-printed paper, 3-9
Press Match, 4-4
color correction, 4-4
preventing paper jams, 6-2
print
adjusting color, 4-4
print job
selecting a print-quality mode, 4-3
print quality
all colors too light or too dark, 4-11
color settings not applied, 4-13
colors align incorrectly, 4-9
colors vary between computers, 4-12
fusing incomplete, 4-10
Downloaded From ManualsPrinter.com Manuals