Printing on Specialty Media
Phaser® 6360 Color Laser Printer
3-27
4. Insert the transparencies into Tray 1 (MPT), and adjust the paper guides to fit the
transparencies. Do not load more than 25 transparencies.
5. On the control panel, select the transparency type and size:
a. Select
Change setup, and then press the OK button.
b. Select
Transparency, and then press the OK button.
c. Select the transparency size, and then press the OK button.
6. In the printer driver, select either Transparency as the paper type or Tray 1 (MPT) as the
paper source.
6360-050
MAX
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
