Xerox PrimeLink B9110

Selecting Paper in the EFI Digital Front End
When you print through the EFI Digital Front End, to facilitate paper selection, you can specify the feed source in
which your envelopes are loaded. If required, in the driver dialog, specify the custom size that you selected on the
device control panel touch screen. When you specify the size in the driver dialog, ensure that you use the same
measurement units, mm or inches, that you used to specify the paper size on the device.
194
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Paper and Media