Xerox PrimeLink B9110

4. Reinsert the staple cartridge unit to the original position in the printer.
5. Close the finisher front cover.
Reinserting the Basic Staple Cartridge
If a staple cartridge has been inserted incorrectly or removed accidentally, perform the following procedure to
reinsert the staple cartridge correctly into the cartridge unit.
1. Open the finisher front cover.
2. Pull out RR11, then remove the staple cartridge unit from the printer.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 453
Production Ready Finishers