Xerox PrimeLink B9110

Crease and Two-Sided Trimmer Configuration
The Crease and Two-Sided Trimmer trims the top and bottom edge of output media, applies creases in the vertical
direction, and overlaps two sheets of output.
NNUUMMBBEERR CCOOMMPPOONNEENNTT DDEESSCCRRIIPPTTIIOONN
1 Dust Box The Dust Box stores trim waste.
2 Trimmer The Trimmer trims the top and bottom edges in the process
direction.
3 Creaser The Creaser applies creases in the vertical direction.
4 Registration The Registration adjusts media skew and detects the position of
the media.
5 Bypass The Bypass transports media through the remaining modules
without providing finishing.
6 Buffer The Buffer overlaps two sheets of the media.
382
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Crease and Two-Sided Trimmer