Xerox PrimeLink B9110

2. Pull out and remove the waste container.
3. Discard all waste.
Important: Ensure that the waste container is empty. If waste or debris remains in the waste container,
the trimmer can malfunction.
4. Ensure that you remove all waste and debris, especially beneath the frame that is behind the waste container.
Use the cleaning rod to remove any remaining waste from inside the trimmer.
5. Return the cleaning rod to its original position on the inside of the lower cover.
6. Reinsert the waste container and push it in until it stops.
7. Close the lower cover.
384
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Crease and Two-Sided Trimmer