4. Place the used staple waste container into the supplied plastic bag.
Note: Do not disassemble used waste containers. Return the used staple waste containers to the Xerox
Customer Support Center.
5. Lower the new staple waste container into position, then gently push in the container until it stops.
WWAARRNNIINNGG:: To prevent injury, do not put your fingers on top of the container.
6. Move the lock lever under RR55 toward the right, to the closed-lock icon.
7. Close the finisher front cover.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 431
Production Ready Finishers
To Next Page
Loading...
Need help?
General