4. Remove any jammed staples.
WWAARRNNIINNGG:: To avoid personal injury, use care when removing jammed staples.
5. While holding the tabs on the new staple cartridge, push in the cartridge until it stops.
Note: Ensure that the small arrows are aligned.
6. Push the Saddle Stitch Unit 3 into the finisher until the unit stops.
7. Close the finisher front cover.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 457
Production Ready Finishers
To Next Page
Loading...
Need help?
General