a. At the control panel, press the Power/Wake button, then touch Power Off.
b. Open the front door, then press the power switch off.
Caution: Do not unplug the power cord while the printer powers down.
2. Remove the packaging from the Wireless Network Adapter.
3. To install the Wireless Network Adapter, follow the instructions provided with the Wireless
Network Adapter.
Caution: Pulling on the adapter can cause damage. Once the adapter is installed, remove it
only as needed, and as directed in the Wireless Network Adapter removal instructions. For
details, refer to Removing the Wireless Network Adapter.
4. Configure the Wi-Fi settings. For details about configuring the Wi-Fi settings, refer to the System
Administrator Guide at www.xerox.com/office/VLC7000docs.
Xerox
®
VersaLink
®
C7000 Color Printer
User Guide
39
Getting Started
To Next Page
Loading...
Need help?
General