Supported Paper Types and Weights for Automatic 2-Sided Printing
Trays Paper Types Weights
Trays 1–4 of all configurations,
Bypass Tray, Tray 6
Bond
Hole-Punched
Letterhead
Plain
Pre-Printed
Recycled
Custom
60–105g/m²
Lightweight Cardstock 106–169 g/m²
Supported Custom Paper Sizes
Tray Number Paper Sizes
Trays 1 and 2 in all configurations
Trays 3 and 4 in the 3-Tray Module
Minimum: 139.7 x 182 mm (5.5 x 8.3 in.)
Maximum: 297 x 432 mm (11.7 x 17 in.)
Bypass Tray Minimum: 105 x 135 mm (4.25 x 5.3 in.)
Maximum: 297 x 432 mm (11.7 x 17 in.)
Envelope Tray Minimum: 148 x 98 mm (5.8 x 3.9 in.)
Maximum: 241 x 162 mm (9.5 x 6.4 in.)
Note: Trays 3 and 4 in the Tandem Tray Module and Tray 6 do not support custom paper sizes.
PPaappeerr TTrraayy SSeettttiinnggss
Configuring Tray Settings
The system administrator can set Trays 1–4 of all configurations to Fully Adjustable mode or
Dedicated mode. When a paper tray is set to Fully Adjustable mode, you can change paper settings
each time that you load the tray. When a paper tray is set to Dedicated mode, the control panel
prompts you to load a specific paper size, type, and color.
Note: To configure tray settings, log in as the system administrator. For details, refer to the
System Administrator Guide at www.xerox.com/office/VLC71XXdocs.
To configure the tray settings:
1. At the printer control panel, touch Device.
162
To Next Page
Loading...
Need help?
General