• Adjusting the paper guides improperly
Most jams can be prevented by following a simple set of rules:
• Use only supported paper. For more information, refer to Supported Paper.
• Follow proper paper handling and loading techniques.
• Always use clean, undamaged paper.
• Avoid paper that is curled, torn, moist, creased, or folded.
• To separate the sheets before loading into the tray, fan the paper.
• Do not load paper above the maximum fill line.
• After loading paper in the trays, adjust the paper guides in all trays. A guide that is not properly
adjusted can cause poor print quality, misfeeds, skewed prints, and printer damage.
• After loading paper in the trays, at the control panel, select the correct paper type and size.
• Before printing, select the correct paper type and size in the print driver.
• Store paper in a dry location.
The following can cause paper jams:
• Polyester-coated paper that is designed especially for inkjet printers
• Paper that is folded, wrinkled, or excessively curled
• Loading more than one type, size, or weight of paper in a tray at the same time
• Loading paper above the maximum fill line in the paper tray
• Allowing the output tray to become overfilled
For a detailed list of supported paper, refer to Supported Paper.
CClleeaarriinngg PPaappeerr JJaammss
Clearing Jams in the Document Feeder
To resolve the error that appears on the control panel, remove all paper from the Duplex Automatic
Document Feeder areas.
1. Lift the lever, and open the top cover of the document feeder.
217
To Next Page
Loading...
Need help?
General