a. At the printer control panel, press the Power/Wake button, then touch Power Off.
b. Open the front door, then press the power switch to the Off position.
Caution: Do not unplug the power cord while the printer powers down.
2. To release the Wireless Network Adapter from the connection panel on the side of the printer,
gently grasp the adapter and push the release lever to the side. Carefully pull the adapter away
from the printer.
Caution: Do not use force to pull on the Wireless Network Adapter. If the latch is released
properly, the adapter pulls out easily. Pulling on the adapter can damage it.
67
To Next Page
Loading...
Need help?
General