Xerox Versant 80 Press - Responsibility Matrix; Feeding Specifications

Versant 80 Press
Customer Expectation & Installation Guide
Responsibility Matrix
Action Customer Carrier Xerox
Ensure adequate space and po
w
er to configure the FreeFlow Print Server to the
print engine.
X
Unpack system / components X
3
Install server hardware X
3
Connect all System Components prior to powering up the system
X
3
Install the printer description files, utilities, and printer drivers on client PCs
X
2
Ensure network configuration X
2
C
onfirm network integrity X
Acquire and install client workstation network hardware and software X
2
Monitor and Adjust calibration for color matching of color management systems X
Load any additional fonts X
Procure BNC transceiver for network connection (if required) X
Set up and administer client workstations X
Provide Helpline Support (when FSMA is purchased) X
1
Provide spared parts (when FSMA is purchased) X
1
Provide service (when FSMA is purchased) X
1
Install all software options designated as customer installable X
Secure all system software X
Assess site security requirements and configure the print server as needed to
satisfy customers IT/Security department
X
Ensure all sensitive customer data is removed from the server and print engine
hard drive before return to Xerox
X
1
Field Service Maintenance Agreement (FSMA) is required for these services, for more information, contact your Xerox representative.
2
A customer can purchase professional consulting hours to have a systems analyst assist in planning and implementing these activities.
3
The Xerox Versant® 80 Press is delivered and installed by Carriers. The carrier unpacks, installs the hardware, connects the print server to the
press, and prints a job from the sample jobs folder. The customer installs all software options.
Feeding Specifications
Bypass Tray
Capacity
250 sheet capacity (using
C
enterline Paper)
Sizes
Min: 3.9 x 5.8 in (100 x 148) SEF
Max: 13 x 19.2 in (SRA3) SEF
Weights 52 to 350* gsm uncoated, 64 to 350* gsm coated
(*note – recommended max weight is 300gsm)
Supported Media Types
Plain,
uncoated, coa
t
ed, transparencies, heavyweight, lightweight, predrilled,
t
abs, en
v
elopes, hole punched, labels,
letterhead
Trays 1 -3
Capacity
550 sheets (per tray); combined capacity of 1,650 sheets (using
C
enterline Paper)
Sizes
Min: 5.5 x 7.2 in (140 x 182 mm)
Max: 13 x 19.2 in(330 x 488 mm)
Weights 64 to 256
Note: Jam rates may be higher with coated stocks when feeding from trays 1-3.
Supported Media Types
Plain,
uncoated, coated, transparencies, heavy
w
eight, predrilled, tabs, hole punched, labels, letterhead
High Capacity Feeder (letter) (HCF)
Capacity
2,000
sheets (using
C
enterline
P
aper)
Sizes 8.5 x 11 in (A4) LEF
Weights 64 to 220 gsm