Xerox Versant 80 Press - Page 30

Versant 80 Press
Customer Expectation & Installation Guide
Hole Punch Capacity by weight and paper finish
Paper type and weight Paper Size
B5 A4 / 8.5 x 11 in B4 / 8.5 x 14 in A3 / 11 x 17 in
Uncoated 52-220 gsm Applicable Applicable Applicable Applicable
Coated 106-220 gsm Applicable Applicable Applicable Applicable
Standard Finisher Limitations Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stacker
Tray, due to the press being forced to wait while each single sheet set is ejected to the Stacker Tray.
Booklet Maker Finisher
The Booklet Maker Finisher is a separate configuration that adds basic booklet making capability to all the same features as the Standard
Finisher. The Booklet Maker Finisher includes:
 Hole Punch
 Stapler
 Top Tray
 Stacker Tray
 Booklet Unit capable of saddle stapling and bi-folding
NOTE: Hole punching is not available to the Booklet Tray
Booklet Maker Finisher
Booklet Maker Finisher
Specifications
For specifications on the Top Tray, Stacker Tray, Stapling, Hole Punching, and the Interposer refer to Standard Finisher
Specifications. The following provides specifications on the Booklet Maker.
Booklet Capabilities by Weight and Paper Finish
Sheets per booklet by weight and paper finish
Paper type and weight Paper Size
A4 / 8.5 x 11 in B4 / 8.5 x 14 in A3 / 11 x 17 in 12 x 18 in SRA3
Uncoated 52-80 gsm 25 25 25 25 25
81-90 gsm 20 20 20 20 20
91-105 gsm 10 10 10 10 10
106-128 gsm 10 10 10 10 10
129-150 gsm 10 10 10 10 10
151-176 gsm 10 10 10 10 10
177-220 gsm 5 5 5 5 5
221-256 gsm 4 4 4 4 4
257-350 gsm 3 3 3 3 3
Coated 106-128 gsm 10 10 10 10 10
129-150 gsm 10 10 10 10 10
151-176 gsm 10 10 10 10 10
177-220 gsm 5 5 5 5 5
221-256 gsm 4 4 4 4 4
257-350 gsm 3 3 3 3 3
Fold Accuracy of the Inner Sheet
(Lead and Side Edges)
• Stapled: ≤1.5 mm
f
or A4 sheets, ≤2.0 mm
f
or other sizes
• Non-stapled: ≤1.5 mm
Bi-Fold Capability
Paper type and weight Bi-Fold (Single Fold) **Capability by weight, size and paper finish
A4 / 8.5 x 11 in B4/8.5 x 14 in A3/11 x 17 in 12 x 18 in SRA3
Uncoated 52-350 gsm 1 1 1 1 1
Coated 106-350 gsm 1 1 1 1 1
Fold Accuracy of Bi-Fold
(Lead and Side Edges)
• Fold accuracy (lead and side edge): ≤2.5 mm
Bi-Fold: 1 sheet/set, 64-300 gsm uncoated stock, 106-300 gsm coated stock
Booklet Marker Finisher
Limitations
• Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the
Stacker Tray.
• Higher jam rates may occur when running 280 gsm and above, tabloid sheets to the Booklet Maker.
• After cancelling a job sent to the Booklet Maker, empty the purge tray before submitting another print
job. This will ensure that purged sheets are not inadvertently inserted into the next booklet printed.