Xerox WorkCentre 3045 User Manual

Regulatory Information
198 WorkCentre 3045 Multifunction Printer
User Guide
2. Immediately disconnect this equipment should it become physically damaged, then arrange for its
disposal or repair.
3. This modem shall not be used in any manner which could constitute a nuisance to other Telecom
customers.
4. This device is equipped with pulse dialing, while the Telecom standard is DTMF tone dialing. There is
no guarantee that Telecom lines will always continue to support pulse dialing.
5. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may
give rise to 'bell tinkle' or noise and cause a false answer condition. If you encounter such problems,
do not contact the Telecom Faults Service.
6. DTMF tones dialing is the preferred method because it is faster than pulse (decadic) dialing and is
readily available on almost all New Zealand telephone exchanges.
WARNING: No '111' or other calls can be made from this device during a mains power failure.
7. This equipment may not provide for the effective hand-over of a call to another device connected to
the same line.
8. Some parameters required for compliance with Telecom Telepermit requirements are dependent on
the equipment (computer) associated with this device. The associated equipment shall be set to
operate within the following limits for compliance with Telecom Specifications:
For repeat calls to the same number:
• There shall be no more than 10 call attempts to the same number within any 30 minute period
for any single manual call initiation, and
• The equipment shall go on-hook for a period of not less than 30 seconds between the end of
one attempt and the beginning of the next attempt.
For automatic calls to different numbers:
The equipment shall be set to ensure that automatic calls to different numbers are spaced such that
there is no less than five seconds between the end of one call attempt and the beginning of
another.
9. For correct operation, total of the RNs of all devices connected to a single line at any time should
not exceed five.

Xerox WorkCentre 3045 Specifications

General

Duplex printing	No
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	24 ppm
All-in-one functions	Copy, Fax, Print, Scan
Compatible operating systems	Windows XP\\r Windows Vista\\r Windows Server 2003\\r Windows Server 2008\\r Windows 7\\r Mac OS v10.5+
Printing colors	Black
Maximum duty cycle	30000 pages per month
Number of print cartridges	1
Maximum copy resolution	600 x 600 DPI
Time to first copy (black, normal)	24 s
Scan to	E-mail, FTP, USB
Output color depth	8 bit
Image formats supported	JPG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Auto-redialing	Yes
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	99
Paper input type	Paper tray
Total input capacity	150 sheets
Total output capacity	100 sheets
Maximum input capacity	175 sheets
Multi-Purpose tray input capacity	10 sheets
Auto document feeder (ADF) input capacity	15 sheets
Custom media width	76 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 356 mm
Paper tray media types	Envelopes, Labels, Plain paper, Recycled paper
Paper tray media weight	60 - 163 g/m²
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
Auto Document Feeder (ADF) media weight	60 - 105 g/m²
Display	LCD
Market positioning	Home & office
Standard interfaces	USB 2.0
Internal memory	128 MB
Sound power level (standby)	15 dB
Sound pressure level (printing)	54 dB
AC input voltage	220 V
AC input frequency	50 - 60 Hz
Power consumption (off)	2.8 W
Power consumption (standby)	51.4 W
Power consumption (average operating)	332 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 85 %
Sustainability certificates	ENERGY STAR
Certification	TUV, UL/CSA, CB/IEC, FCC

Weight and Dimensions

Depth	389 mm
Width	410 mm
Height	318 mm