Features
30 WorkCentre 3045 Multifunction Printer
User Guide
Item Description
Ring Tone Volume Specifies the ring volume for incoming faxes.
Line Type Specifies the default line type: PSTN or PBX.
Dialing Type Specifies the dialing type.
Interval Timer Specifies the interval timer from 3–255 seconds.
Number of Redial Specifies the number of attempts made to redial a fax number from 0–9.
Redial Delay Specifies the interval between redial attempts from 1–15 minutes.
Junk Fax Filter When set to On, accepts incoming faxes only from numbers registered in the Address
Book.
Remote Receive When set to On, you can elect to receive a fax by pressing the remote receive code on the
external telephone. Press the remote receive code after you pick up the telephone
handset.
Remote Rcv Tone Specifies the tone in two digits from 00–99, when Remote Receive is set to On.
Send Header When set to On, each outgoing fax includes a header, including the company name, fax
number, and the date and time the fax was sent. When set to Off, no header information
is included in the outgoing faxes.
Note: Many countries have fax regulations that require Send Headers in each outgoing
fax. The regulations specify the information that must be included in the header.
Company Name Specifies the sender name that is recorded in the sender report.
Your Fax Number Specifies your telephone number, which is printed at the top of each page sent from your
printer.
Fax Cover Page When set to On, automatically prints a fax cover page. When set to Off, does not print a
fax cover page.
DRPD Pattern Specifies a distinctive ring pattern for use with DRPD service. Your telephone company
specifies the DRPD Patterns.
Prefix Dial Specifies if you want to add the prefix number when you send a fax.
Prefix Dial Num Specifies the prefix dial number, up to five digits. This number dials before any auto dial
number is started.
Discard Size Specifies if the printer discards any excess data at the bottom of the page.
ECM If Error Correction Mode (ECM) is set to On, it attempts to correct errors in the fax
transmission from problems, such as a noisy telephone line. The default setting is On.
Extel Hook Threshold Specifies the threshold value for the external telephone.
Modem Speed Specifies the fax modem speed.
Fax Activity Turns Auto Print On or Off.
Fax Transmit Specifies the fax transmit mode.
Fax Broadcast Specifies the fax broadcast mode.
Country Specifies the country in which the fax is installed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
