Xerox WorkCentre 3315DN System Administrator Guide

Machine Parts and Connection Ports
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
20
The machine supports connectivity via a wireless only connection if required. The machine will
automatically configure wireless networking when powered on.
Note The machine will not connect to the wireless network while the network cable is attached.
There are several ways to configure Wireless Connectivity:
• At the Machine. For instructions refer to Configure Wireless Connectivity at the Machine: on
page 20.
•Using Internet Services. For instructions refer to Configure Wireless Connectivity Using
Internet Services (WorkCentre 3325DNI) on page 24.
•With the Wireless Setting Program. For instructions refer to Wireless Setup (WorkCentre
3325DNI) on page 46.
Configure Wireless Connectivity at the Machine:
1. Press the Machine Status button.
2. Press the Up/Down arrow buttons to highlight Network Settings and press OK.
3. Enter the Administrator Password using the alphanumerical keypad. The default is 1111. Refer to
Administrator Access on page 19.
4. Press the Up/Down arrow buttons to highlight Wireless and press OK. The options are:
• Wi-Fi ON/OFF - allows you to enable or disable wireless connectivity.
• WPS Settings - allows you to select the Wi-Fi Protected Setup - the options are PBC or PIN.
• WLAN Settings - allows you to use a Wizard to find the wireless network name automatically,
or use the Custom feature to enter the SSID (Service Set Identifier) information manually.
• WLAN Default - allows you to restore the default wireless settings.
• WLAN Signal - allows you view the strength of the wireless connection.
4. At the Wireless menu, press the Up/Down arrow buttons to select Wi-Fi ON/OFF and press OK.
Ensure that On is selected and press OK.
5. Press the Up/Down arrow buttons to select WLAN Settings and press OK. The options are:
a. Select Wizard - to have the machine find the WPS Settings automatically. If you select this,
the Searching WLAN screen displays and the machine searches the wireless network.
• Select your wireless network and click OK.
• Enter the wireless security information if requested and click OK.
• Select Yes to apply the changes.
b. Select Custom - to edit the SSID information manually. If you select this option the Edit
SSID screen displays.
• Enter the SSID using the keypad and click OK.
• Select the Operation Mode
and click OK.
• Select the Channel and click OK.
• Select the Channel MHz and click OK.
• Select the WLAN Security if required and click OK.
• Select the Authentication if required and click OK.
• Enter the WEP Key if required and click OK.
• Select Yes to apply the changes.

Xerox WorkCentre 3315DN Specifications

General

Brand	Xerox
Model	WorkCentre 3315DN
Category	All in One Printer
Language	English