English
Xerox WorkCentre 3550
Quick Use Guide
17
4. Click Typical installation for a local
printer and follow the wizard instructions
to install the local printer.
Note: For Custom install instructions, refer
to the System Administrator Guide.
If your printer is not already connected to
the computer, the Connect Device screen
will appear. After connecting the printer,
click Next. If you don’t want to connect the
printer at this time, click Next, and No on
the following screen. Then the installation
will start and a test page will not be printed
at the end of the installation.
5. After the installation is finished, click
Finish.
If the Test Print operation is successful, continue
on to the next setup procedure in this document.
If the print operation failed, refer to
Troubleshooting on page 35.
To Next Page
Loading...
