EasyManuals Logo

Xerox WORKCENTRE 5755 System Administrator Guide

Xerox WORKCENTRE 5755
362 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Windows 2000/2003 Server
WorkCentreâ„¢ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
143
7. Check the checkbox to select [Print Services for UNIX].
8. Click on [OK].
9. Click on [Next].
10. Close the [Add/Remove Programs] window.
Add the Printer
1. From the [Start] menu, select [Settings] and then [Printers]/[Printers and Faxes].
2. Double-click [Add Printer] and click on [Next].
3. Select [Local Printer] (Windows 2000) or [Local Printer attached to this computer] (Windows
2003) and uncheck [Automatically detect and install my Plug and Play printer].
4. Click [Next].
5. Select [Create a New Port].
6. Select [LPR Port] from the Type drop-down menu and click [Next].
Note: The LPR Port is only available when Print Services for UNIX is installed.
7. Enter the IP Address of the printer.
8. Enter the printer name.
9. Click on [OK].
10. You will be prompted for a Print Driver. Select [Have Disk] and click [Browse]. Locate the Drivers
folder on the CD.
11. Select the required driver.
12. Click on [Open] and then [OK].
13. Select the model of your machine from the list. Click on [Next].
14. The Name your Printer screen appears. Enter a printer name and click [Next].
15. The Printer Sharing Screen appears. If you will be sharing this printer with other clients select
[Share As] (Windows 2000) or [Share Name] (Windows 2003) and enter a share name. Click
[Next].
16. Enter details in the [Location] and [Comment] if required. Click [Next].
17. Select [Yes] to print a test page and verify that it prints at the device. Click [Next].
18. Click [Finish]. The Print Driver will install.
Configure the Print Driver
1. From the [Start] menu, select [Settings] and then [Printers]/[Printers and Faxes].
2. Right-click on the printer icon and select [Properties].
3. Click on the [Advance] tab, then click on [Printing Defaults].
4. Select the settings you wish to set for the printer.
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide
for Windows CD.

Table of Contents

Other manuals for Xerox WORKCENTRE 5755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WORKCENTRE 5755 and is the answer not in the manual?

Xerox WORKCENTRE 5755 Specifications

General IconGeneral
Print TechnologyLaser
Print SpeedUp to 55 ppm
Print ResolutionUp to 1200 x 1200 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Connectivity10/100/1000Base-T Ethernet, USB 2.0
Duplex PrintingYes
FunctionsPrint, Copy, Scan, Fax
Fax Transmission Speed33.6 Kbps
Operating System CompatibilityWindows, Mac, Linux
Paper CapacityStandard: 1, 100 sheets; Maximum: 4, 700 sheets

Related product manuals