Xerox WORKCENTRE 5755 System Administrator Guide

Apple Macintosh 10.X
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
154
17. Double-click the [Add] button to add a new printer or click the [Printers] menu and click on [Add
Printer].
18. Select [IP Printing] from the top menu.
19. Select [Internet Protocol Printing] or [LPD/LPR Printing] from the next menu.
20. Enter the IP Address of the printer.
21. Enter a name for the print queue. (You may leave this blank if you prefer).
22. Select [Xerox] from the Printer Model list.
23. Select your printer model from the Model Name list.
24. Click on [Add]. The device will appear in the Printer List.
25. Select the printer and click on the [Show Info] button.
26. Click on [Installable Options].
27. Select the options as installed on your device. If you want to use the Save Job for Reprint feature,
ensure Job Storage is set to [Installed].
28. Click on [Apply Changes].
29. Close the Printer Info box.
30. Print a document to verify that the printer is installed correctly.
View the Printer Utility on the Internet Services Print and Fax Services CD.
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide
for Macintosh CD.

Xerox WORKCENTRE 5755 Specifications

General

Print Technology	Laser
Print Speed	Up to 55 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	Standard: 1, 100 sheets; Maximum: 4, 700 sheets