Scanning
142 Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
8. To adjust saturation:
a. Touch Saturation.
b. On the Saturation screen, adjust the sliders to make the image more vivid or more pastel.
c. Touch OK.
9. To set the resolution:
a. Touch Resolution.
b. On the Resolution screen, select a resolution from 72 dpi through 600 dpi.
c. Touch OK.
Selecting Layout Adjustments
Layout adjustments provide additional settings for the size and orientation of the original, and erasing
the edges.
To select layout adjustments:
1. Press the Services Home button, then touch Workflow Scanning.
2. Touch the Layout Adjustment tab.
3. To specify the amount to erase from the edges of your image:
a. Touch Edge Erase.
b. On the Edge Erase screen, select an option:
• All Edges: Erases all four edges by the same amount. Touch the All Edges arrows to
specify the amount to erase from the edges.
• Individual Edges: This option specifies different amounts to erase from the edges. To
specify the amount to erase from each edge, use the arrows.
c. Touch OK.
4. To scan the correct area of the original image:
a. Touch Original Size.
b. On the Original Size screen, select an option:
• Auto Detect: This option allows the printer to determine the size of the original.
• Preset Scan Area: This option specifies the area to scan when it matches a standard paper
size. In the scrolling list, touch the desired paper size.
• Custom Scan Area: You can specify the height and width of the area to scan. To specify
the area, touch the Height-Y and Width-X arrows.
c. Touch OK.
5. To manage how the scanner treats blank pages:
a. Touch Blank Page Management.
b. Select an option:
• Include Blank Pages: This option includes scanned pages that are blank.
• Remove Blank Pages: This option omits scanned pages that are blank.
c. Touch OK.
To Next Page
Loading...
Need help?
General
