Xerox WorkCentre 6655i - Page 152

Scanning
152 Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
5. To change any of the scan settings, use options on the Scan To screen. For details, see Setting Scan
Options on page 139.
6. To select the action to take if a file already exists:
a. Touch the Filing Options tab.
b. Touch If File Already Exists. Select an option.
c. Touch OK.
7. To set the quality and file size:
a. Touch the Filing Options tab.
b. Touch Quality/File Size.
c. To select a setting, use the slider. The settings range from Highest Compression/Smallest File
Size to Lowest Compression/Largest File Size.
d. Touch OK.
8. Press the green Start button.
The Job Progress screen appears, and the original is scanned. The file is stored as a file at the
destination.