Xerox WorkCentre 6655i User Manual

Troubleshooting
Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer 241
User Guide
Symptom Cause Solution
Partial blanks, creased paper, or
blotted printing
The paper is damp. Replace the paper.
The paper is outside the
recommended specification
range.
Replace the paper with a
recommended size and type, and
confirm that your control panel and
print driver settings are correct. For
details, see Supported Paper on page
54.
Condensation inside the printer
causes partial blanks or creased
paper.
Turn on the printer and leave it on for
at least one hour remove the
condensation. For assistance, go to the
Xerox
®
Support website at
www.xerox.com/office/WC6655suppor
t.
The toner cartridges are not
Xerox
®
toner cartridges.
Replace the toner cartridges with
genuine Xerox
®
toner cartridges. For
details, see Consumables on page 207.
The paper is impeded in the
paper path.
• Remove any paper or debris from
the paper path.
• Ensure that the paper trays are
closed.
• Ensure that the rear cover is closed
and locked.

Xerox WorkCentre 6655i Specifications

General

Print Technology	Laser
Standard Paper Capacity	550 sheets
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi (optical)
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Memory	4 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Maximum Paper Capacity	1250 sheets