Xerox WorkCentre 7242 - Page 77

Using CWIS to Configure Settings on the Machine
Xerox WorkCentre 7232/7242 System Administration Guide 67
• Data Receive Time-Out - Enter the timeout period for receiving data from WSD
clients between 1 and 65535 seconds in 1 second increments.
• Notification Delivery Time-Out - Enter the timeout period for notification delivery
to WSD clients between 1 and 60 seconds in 1 second increments.
• Maximum TTL - Enter a value for the maximum TTL between 1 and 10. Enter
the number of network for communicating with WSD clients through rooters.
• Maximum Number of Subscribers - Enter the maximum number for WSD clients
between 10 and 100.
6. Select [Apply] to reflect the new settings.
7. Enter the user ID and passcode, and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8. When the reboot message appears, select [Reboot Machine].