99
Instructions for 9.x.
1. Double-click installer file to install the printer driver on your Macintosh.
2. Click [Continue]
3. Click [Agree] to accept the License Agreement.
4. Click [Install].
5. Your Mac may need to be restarted. Click [Yes] to continue.
6. The driver will install. Select [Restart].
7. Once the Mac has restarted, select [Apple], then [Chooser].
8. Select the printer icon, then select the Postscript Printer Name which corresponds to the name given
to the machine in AppleTalk Settings - Name.
9. Select [Create].
10. Select the PostScript Printer Description (PPD) that matches your machine model.
11. Click [Select].
12. Click [Setup].
13. Click [Configure].
14. Select the installed options which correspond to your machine configuration.
15. Click OK.
16. Click OK and close the Chooser.
17. Print a document from an application to verify that the printer is installed correctly.
To Next Page
Loading...
Need help?
General
