222
Schedule a Daily Overwrite
A TCP/IP network-connected device can be set to overwrite image data on a daily basis. To schedule a
daily overwrite, perform the following steps.
1. Open your Web browser and enter the IP address of the machine in the Address or Location field.
Press [Enter].
2. Click the [Properties] tab,
3. Enter the Administrator User name and password if prompted. The default is [admin] and [1111].
4. Select [Security].
5. Click the [On Demand Overwrite] link. This should be located in the Security group of links.
6. Click [Scheduled].
7. Make any required selections to enable the Overwrite.
8. Specify the time for the Overwrite in [Hours], [Minutes], and select either [AM] or [PM]. The machine
will be taken off line each day at the time specified to perform the overwrite.
To Next Page
Loading...
