228
Enable Xerox Standard Accounting
At your Workstation
1. Open your Web browser and enter the TCP/IP address of the machine in the Address bar. Press
[Enter].
2. Click the [Properties] tab.
3. Enter the Administrator User name and password if prompted. The default is [admin] and [1111].
4. Select the [Accounting] link.
5. Select the [Xerox Standard Accounting] link.
6. The first time you use XSA, you must log in with the administrator user name and password. The
default is [admin] and [1111].
7. Click the [Manage Accounting] button.
8. Click the [Enable Accounting] button.
NOTE: The "Enabling Accounting will require a user account to use the machine..." pop up box will
appear. Click OK to close the box.
When you enable XSA, users must enter a valid user name at the machine to access any features.
Continue on to the next steps to create a new group account.
To Next Page
Loading...
