29
Set Permissions for Job Management
The Job Management page allows you to set permissions that allow System Administrators or general
(non-administrator) users to delete jobs from the machine print queue.
NOTE: System Administrators can always delete any job, regardless of the setting selected on the Job
Management Page.
1. Open your web browser and enter the TCP/IP address of the machine in the Address or Location field.
Press [Enter].
2. Click the [Properties] tab.
3. Enter the Administrator User name and password if prompted. The default is [admin] and [1111].
4. Click the symbol to the left of [General Setup].
5. Select [Job Management] in the directory tree.
6. Select [All Users] to allow any user to delete their own or any other job OR select [Administrators Only]
to allow only users with administrative access (password) to delete jobs.
7. Click [Apply] to accept the changes or [Undo] to return the settings to their previous values.
To Next Page
Loading...
