195
Go to the FAX server
21. Configure the fax server so that it is able to monitor the fax repository for documents. Refer to the
manufacturer's documentation provided with your fax server to complete this task.
At the Machine
22. Select the [Server Fax] button from the touch screen, then touch [OK].
23. Enter a valid fax number. Press [Add], then [Close].
24. Load a document in the document handler and press the green start button.
25. Verify that your fax is received at the specified fax machine.
You have completed the steps to enable Server Fax.
To Next Page
Loading...
Need help?
General
