Xerox WORKCENTRE 7775 User Manual

Faxing
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide
145
Additional Fax Options
Selecting a Confirmation Report
1. Touch Fax on the touch screen.
2. Touch the Fax Options tab, then touch Confirmation Report.
3. Touch one of the following options:
• Print Confirmation for all fax jobs.
• Print on Error Only.
4. Touch Save.
Selecting the Starting Rate
Select the highest starting rate unless the fax destination for the fax you are sending has
special requirements.
To select the transmission speed for a fax:
1. Touch Fax on the touch screen.
2. Touch the Fax Options tab, then touch Starting Rate.
3. Touch Super G3 (33.6 Kbps), G3 (14.4 Kbps), or Forced (4800 bps), then touch Save.
Delay Sending a Fax
To send a fax at a specified time (within 24 hours):
Note: The printer needs to be set to the current time before using this function.
1. Touch Fax on the touch screen.
2. Touch the Fax Options tab, then touch Delay Send.
3. Touch Specified Time:
•Touch Hour, then touch the arrows to set a number from 0 to 12.
•Touch Minute, then touch the arrows to set a number from 0 to 59.
•Touch AM or PM.
4. Touch Save.
5. Load the originals, then enter the fax number of the recipient.
6. Press the green Start button to scan the document.
The fax will be sent at the specified time.

Xerox WORKCENTRE 7775 Specifications

General

Brand	Xerox
Model	WORKCENTRE 7775
Category	All in One Printer
Language	English