Printing
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide
53
3. On the printer’s touch screen, set the following:
• From the Size menu, select Custom, then enter the size of the Pre-Cut Tabs, including the width
of the tabs.
• From the Paper menu, select Pre-Cut Tabs, then enter the number of tabs in each set.
•Touch Confirm.
4. If you have not changed the media, touch Confirm on the touch screen.
Note: Tab number one must be on top. Partially used tab sets must be removed from the tray
before printing a new Pre-Cut Tabs job.
To Next Page
Loading...
