Xerox WorkCentre 7800 series User Manual

Troubleshooting
WorkCentre 7800 Series Multifunction Printer 235
User Guide
Clearing Jams at 2b in the Finisher
1. Open the front door of the finisher.
2. Move green lever 2b to the right.
3. Remove the jammed paper.
4. If the paper is inaccessible or if the control panel displays a message to do so, turn knob 2c in the
direction shown to release the paper.
5. Carefully remove the paper.
Note: If the paper is torn, remove all torn pieces from the finisher.

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English