Xerox WorkCentre 7800 series User Manual

Troubleshooting
236 WorkCentre 7800 Series Multifunction Printer
User Guide
6. Return lever 2b to its original position.
7. Close the front door of the finisher.
Clearing Jams at 3 in the Finisher
1. Open the front door of the finisher.
2. Pull down green lever 3.
3. Carefully remove the jammed paper.
Note: If the paper is torn, remove all torn pieces from the finisher.
4. Return lever 3 to its original position.
5. Close the front door of the finisher.

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English