Xilinx KCU105 User Manual

KCU105 Board User Guide www.xilinx.com 100
UG917 (v1.4) September 25, 2015
Appendix C: System Controller
• Enable KCU105 Si570 Automatic Restore at Power-Up Reset
There is no menu response to selecting this option. To verify that the enabling function
occurred, select option 1 again.
• Enable KCU105 Si5328 Automatic Restore at Power-Up Reset
There is no menu response to selecting this option. To verify that the enabling function
occurred, select option 1 again.
• View KCU105 Clock Restore Options
Clock Restore Options:
----------------------------------------------
Si570 Automatic Restore at Power-Up Reset = ENABLED
Si5328 Automatic Restore at Power-Up Reset = ENABLED
• Return to Clock Menu
This option returns to the menu level above.
Option 7: Read KCU105 Si570 User Clock Frequency
This option displays the current frequency setting of the Si570.
Si570 Current Frequency = 1.562500E+02 MHz
Option 8: Read KCU105 Si5328 MGT Clock Frequency
This option displays the current frequency setting of the Si5328.
Si5328 CKOUT1 Current Frequency = 2.000000E+02 MHz
Si5328 CKOUT1 Current Frequency = 2.000000E+02 MHz
• Return to Main Menu
This option returns to the menu level above.
Send Feedback

Xilinx KCU105 Specifications

General

Brand	Xilinx
Model	KCU105
Category	Motherboard
Language	English